Demo History
Demo Request History
Getting info for CourseID: 4974
PHYS 1060 001: How Things Work
MWF 13:00-13:50 Room 203 Lihong Yao
2013-01-14
2013-01-16
2013-01-18
2013-01-23
2013-01-25
2013-01-28
2013-01-30
2013-02-01
2013-02-04
2013-02-06
2013-02-08
2013-02-13
2013-02-18
2013-02-20
2013-02-22
2013-02-25
2013-02-27
2013-03-01
2013-03-04
2013-03-06
- Class was cancelled due to snow storm.
2013-03-08
2013-03-18
- 1. The fluorescent lamp fixture with a normal fluorescent lamp and one without the phosphor coating. 2. Sodium vapor lamp. 3. Mercury vapor lamp. 4. A box of tide detergent. Thanks.
- video - Transverse Waves
(
Long Spring only.)
- Line (discontinuous) Spectra
(
Neon, Helium, and Mercury.)
2013-03-20
- One incandescent light bulb, one a normal fluorescent lamp with phosphor coating, and one LED lamp, in working circuits. Thanks.
- Ohm's Law
(
(with several different colors of LEDs to show:
1. that it's a one-way device for current;
2. that it emits light once it begins to conduct current. thanks.) )
2013-03-22
2013-03-27
2013-03-28
2013-03-31
- Ohm's Law
(
To show how sensitive the MOSFET is to a tiny amount of charge. The procedure is I can touch the gate of the transistor with one finger and either the + or - of the power source with the other finger, and thus switch the current ON and OFF. Thanks a lot!)
2013-04-01
- The cylindrical glass container (about 1 liter) with water in it, a wristwatch to be submerged inside the water, to show that the numbers vanish when I hit the total internal reflection angle. Thanks.
- Total Internal Reflection
- Thin Lenses with Objects
(
Lens with different focus lengths (curvatures), and different sizes. Thanks.)
2013-04-03
2013-04-05
2013-04-09
2013-04-10
-
1. Several masonary nails (high carbon steel), a vice, a really hot blow-torch, pliers, and a beaker of cold water. I want to harden a nail by heating it yellow hot and quenching, then trying to bend it. I then want to anneal a nail by heating it yellow hot and letting it air cool slowly, then bending it without breaking it.
2. A magnet and a cheap 18-8 stainless steel knife (the magnet should not stick). If you have no knife that a magnet won't stick to, then a spoon or a fork will do.
Thanks a lot!
- LN2 - Thermal Effects on Solids and Gases
(Just the Lead Bell. Thanks.
)
- Phase Change in Iron
2013-04-12
2013-04-15
- 0. Cornstarch and water, premixed.
1. A hot natural gas burner
-
2. A beaker of water
-
3. A piece of Plexiglas or Lucite to heat, soften, and melt
-
4. A milk jug (high-density polyethylene)
-
5. A paper packet of 2-part 5-minute epoxy and a card to mix them on
-
6. Superglue and two metal objects to glue together
-
7. An ordinary (polypropylene) rope and a spectra rope (pink) hanging from the catwalk.
Thanks!
2013-04-17
- 1. A milk jug (high-density polyethylene).
2. A paper packet of 2-part 5-minute epoxy and a card to mix them on.
3. Superglue and two metal objects to glue together.
4. A piece of Kevlar polymer plastic.
Thanks!
- LN2 - Thermal Effects on Solids and Gases
2013-04-19
- A Jumping toys, with a suction cup and spring. You could press the toy down until the suction cup stuck and then, when air had leaked into the cup enough, the toy would jump. Thanks.
- video - Mouse Trap Atomic Bomb
2013-04-22
2013-04-26
2013-04-29